| |
Advanced Transportation Management System (ATMS)
A Pedestrian’s Guide to
Push-Button Activated Traffic Signals
|
Pedestrian signals will
not automatically change to provide pedestrian crossings at locations with push buttons; the button must be pushed to activate the signals.
Pedestrians should never cross the intersection on a green light activated by a vehicle because time provided for vehicles varies from cycle to cycle and may not be sufficient for pedestrians. Each intersection is timed differently according to it's size and traffic/pedestrian patterns. Intersections have been studied and timed based on an average walking speed. Longer crossing times are provided at intersections used primarily by children and senior citizens. |
| |
|
|
 |
-
You must first press the pedestrian pushbutton.
Waiting time will vary at each intersection.
-
Wait for the WHITE, WALKING FIGURE symbol ( or WALK
signs on older signals) before you step off the curb into the
street.
|
 |
|
|
|
|
|
|
|
|
|
|
 |
-
The ORANGE FLASHING HAND (or DON'T WALK signs on
older signals) alerts pedestrians that they may not start
crossing the intersection, but may finish crossing
if already started during the "WALK" indication.
-
When the ORANGE HAND (or DON'T WALK signs on older
signals) stops flashing, traffic will begin to move across the
crosswalk. Pedestrians should wait on the curb for the next WALK
symbol to be activated by once again pushing the button.
|
 |
If you have any questions please call 240-777-2190
For
Safety tips click this link
|