ePlans is our web-based application for electronic plan submission and review using Project-Dox software. Review ePlans submittal requirements for Septic permits below. 


Basic Submittal Requirements

  • File name should not be longer than 20 characters. 
  • You must complete your task for your project to move forward. This is accomplished on the eForm, which can be found on the Task tab of your project. The task name will vary depending on your project's stage. Examples include: "Upload and Submit" or "Respond and Resubmit."
  • Drawings must be uploaded into the Drawings folder. Each sheet in your plan set is required to be a single file PDF. Documents must be uploaded into the Documents folder. These can be submitted as a multi-page PDF. All drawings must have a 3" x 4" clear space at the top center of the sheet to allow for DPS batch stamping. 
  • When submitting corrected information, drawings must be uploaded into the Drawings folder and documents must be uploaded in the Documents folder. Corrected drawings must be submitted using the exact same file name originally used. This will allow the system to auto-version resubmitted files. The Revisions folder is only permitted to be used after the permit has been issued by DPS and a formal revision is necessary. 
  • Digital Signature of Plans Information

ePlans Submittal Requirements for Septic Permit

Sheet/Drawing Type Sheet/Drawing Reference Number Acceptable ePlans File Name Number of Characters
Septic  0001-999  SEW0001  7 




 

  [email protected]
   240-777-0311